(NEVER MIX CHEMICALS)

Fine grade rapid dissolving chlorine granules for easy, cost effective chlorination of your swimming pool. These 55% granules are completely soluble and will hardly effect the pH of swimming pool water, as they contain Cyanuric Acid (Stabiliser) they are also automatically stabilised against destruction of chlorine residual by sunlight in outdoor pools.

1. To maintain the chlorine level in private pools at a rate of between 2 to 3mg/litre (ppm), add 84g per 45.5m3 per day (3ozs per 10,000 gallons).
2. Pre-dissolve the granules, when dissolving the product always add product to water and not vice versa. Use only 100g of product per 10 litres of water each treatment and repeat treatments if required. Do this when the pool is not in use. Re-adjust the pH between 7.2 and 7.6 for optimal bather comfort.
3. Regularly use a reliable test kit to determine Free Chlorine residual/PH levels and dose the pool accordingly
4. It is good practise to shock treat the pool every 2/3 weeks using a Granular Shock Product.

Always check active strength of products when price matching against alternative suppliers and remember, half the strength is twice the price!

Sodium Dichloroisocyanurate Dihydrate, Copper Sulphate, Aluminium Sulphate.

 (NEVER MIX CHEMICALS)
Chlorine Granules with Stabiliser, Algicide and Clarifier.
Multi-Pool Granules are ideal for the daily treatment of your swimming pool, Occasionally your pool will need to be shock chlorinated with shock granules.
DOSAGE:
To increase the Free Chlorine Residual by 1 ppm (parts per million) in 50 cubic meters (11,000 gallons) of pool water, add 100 grams of Multi-pool Granules, and (15,000 gallons) of pool water, add 280 grams of Multi-Pool Granules.
Pre-dissolve the granules in a clean plastic bucket filled with pool wager, never add more than 100 gm per 10 ltr bucket, add the Multi-Pool Granules to water not vice-versa.
Remove any water treatment products from the skimmer
Ensure that the pool circulation pump is running when adding this product, slowly pour the dissolved solution into the skimmer basket.
Operate the circulation pump for at least 30 minutes after adding Multi-Pool Granules.
Re-test water after 30 minutes to ensure that the optimum chlorine residual has been achieved (2-3ppm).
Never add this product when your pool is being used, do not allow the pool to be used for 30 minutes after the Multi-Pool Granules have been added.

Once a fortnight, or more frequently in hot weather, the pool water should be Shock treated by the addition of Granular Shock. Also apply this product if the pool has been neglected or algae growth has appeared on the floor or walls of the pool or there has been an exceptionally high bather load. Leave the pool filtration running continuously until problem has been resolved.

1. Add 110g per 10 m3 of pool water.
2. Pre-dissolve the product in lukewarm water
3. Adjust the pH to 7.2
4. Slowly pour the dissolved solution over the pool return inlets.

Also apply this product if the pool has been neglected or algae growth has appeared on the floor or walls of the pool or there has been an exceptionally high bather load. Leave the pool filtration running continuously until problem has been resolved.

Always check active strength of products when price matching against alternative suppliers and remember, half the strength is twice the price!

Trichloroisocyanuric Acid, Dry

90% available chlorine tablets, slow dissolving for easy, cost effective chlorination.

These tablets are designed for use with a chlorine feeder unit (or floating feeder for small above ground pools) which will only accept small chlorine tablets or a spa or hottub.When the feeder device is empty, top up with tablets following the manufacturers instructions. Ensure tablets used in the feeder are of the same chemical (Trichloroisocyanuric acid).

Always check active strength of products when price matching against alternative suppliers and remember, half the strength is twice the price!

These concentrated large tablets are slow dissolving for easy, cost effective chlorination. They are for use with a Feeder unit / Floating dispenser or simply just pop into your skimmer basket for regular effective chlorination of your swimming pool.

1. Remove plastic wrapping, if applicable, and place tablets in a floating dispenser or tablet feeder.
2. Recommended dosage: Floating Dispenser ? 2 Tablets per 32 m3 (7,000 gls) of pool water. Dissolution time approximately 10-14 days.
3. When used a feeder/dispenser, ensure tablets used are of the same chemical (trichloroisocyanuric acid). If other materials have been used previously, wash out feeder thoroughly before adding tablets.
4. Check chlorine levels regularly with a Test Kit and maintain a chlorine residual of between 2-3mg/litre (ppm).
5. Check pH value regularly with a Test Kit and maintain a level of 7.2 to 7.6.

Always check active strength of products when price matching against alternative suppliers and remember, half the strength is twice the price!

(NEVER MIX CHEMICALS )

Always add chemicals to water and not water to chemicals

Bromine tablets are for easy, effective sanitising used in conjunction with a brominator or placed in skimmer basket.

1. These tablets are designed for use with a Bromine Feeder or placed in skimmer basket.

2. When the feeder device requires refilling with tablets always follow manufacturers instructions.

3. Ensure tablets used in the feeder are of the same chemical (Bromo-chloro-Dimethyl Hydantoin).  If  other materials have been used previously, wash out feeder thoroughly before adding tablets.  Use only feeders designed for Bromine.

4. Adjust feeder to ensure a constant bromine residual is present in the pool.

5. Check bromine levels regulary with a Test Kit and maintain a bromine residual of  3-4mg/1 (ppm) for domestic pools.

6. Check pH value regularly with a Test Kit and maintain a level of 7.2 to 7.6.

Trichloroisocyanuric Acid, Aluminium Sulphate, Copper Sulphate.

200g Multi-functional, slow dissolving tablets containing stabilised chlorine, algicide and clarifier.

Multi-Pool tablets from Oasis Pool Products are a handy way to keep your above or in ground swimming pool sparkling with minimal effort leaving more time for you and your family to enjoy the benefits. The multi-functional tablets eliminate the need to seperately add chlorine, algicide and clarifier as one dose will do the job of all three!

Multi-Pool Tablets are designed for use in a pool skimmer basket. Remove tablets from the plastic wrapping and place in the skimmer basket. Never place tablets directly on the pool surface.

Never add other pool water treatment products to the skimmer when Multi-Pool products are in the skimmer basket.

DOSAGE;

Adjust the quantity of tablets placed in skimmer basket according to the test kit results. Multi-Pool Tablet consumption will increase during warm weather and heavy usage of the pool.

Test pH level regularly and maintain between 7.2 and 7.6.

Alkali is for increasing the pH of water. Acid/alkaline conditions are measured on the pH scale which ranges from 0 to 14. Ideal bathing conditions exist at a slightly alkaline level of 7.2 to 7.6 with total alkalinity of 80/120mg/litre (pmm). This range will also allow most effective use of other swimming pool chemicals. Use a test kit to establish the pH value of the pool water.

Your Pool needs to be maintained at a pH of between 7.2 and 7.6 and the total alkalinity of between 80-120 ppm (parts per million). Operating within these parameters will prevent damage to your pool equipment and ensure that the sanitizer in your pool is effective. pH Minus can be used to reduce either the pH or Total Alkalinity of your pool water, pour around the edge to adjust pH and slug dose into the deepend to adjust total alkalinity. Use a test kit to determine both the pH and Total Alkalinity of your pool.

Sodium Bicarbonate

Your Pool or Spa Water needs to have a Calcium Hardness level of between 200ppm and 400ppm (parts per million). Water with a lower calcium level (Soft water) is likely to damage your pool equipment

1. Test the water to establish the Calcium Hardness of your pool or spa water. If below 150ppm proceed as follows;
2. To increase the Calcium Hardness by 10ppm add 15g of Harness Plus per 1,000 litres of water (700g per 10,000 gal)
3. Make sure that the circulation pump is on and that the pool or spa is NOT being used
4. Always pre-dissolve this product in a clean plastic bucket full of water. (Dilute at a rate of100g per 10 litre bucket). Add soloution direct to the pool or spa water
5. Wait approximately 30 minutes before using pool or spa